More Ways to Conserve Water

Today's AJC has a great article about a man in Roswell, GA named Jorg Voss who takes water conservation seriously. Since we discussed power and water conservation this past weekend, and although this post is not directly related to windows, it has a lot to do with our aim to help you Go Green and conserve. So here's some of the things Voss is doing on a daily basis that maybe you can try at home.

Disclaimer! Some of these tips may not be for the faint in heart. Don't feel like you have to be another Jorg Voss but maybe there's some ideas you can take from Voss' lifestyle that you can implement at home. Making even one lifestyle change makes a big difference.

1) Rain Collection.
Voss has put together a complex rain collection system. When it's actually raining in Georgia this is a useful tool. However, what ol' Jorg is doing is collecting water from his gutters and using a submersible pump to water his lawn and garden!

2) Waiting for the Water to Warm Up... Don't Let it Go Down the Drain!
Water that we usually waste is collected and reused by Voss. Water that flows while waiting for it to warm in the shower is captured in wash pans and can be used for flushing the toilet or again for watering.
Another tip I received recently that I'm sure Voss is already putting into practice, is reusing dishwater. This "gray water" or, recycled wastewater that doesn't come from the toilet, can be used also for flushing the toilet or watering such plants as Hostas, Hellebores, and most ferns. They love gray water. But don't use it on your Dog Hobbles, Azaleas or Sourwoods.

3) The Wash. That Wasteful Rinse Cycle.
The second and third cycles of the washing machine is a rinse cycle which provides water that is easily reusable. What Voss does with his rinse cycle water is unhook the hose that usually takes the waste water to the sewer and reroutes it to a collection container where the mostly clean water can be reused for washing dishes, watering outdoors, flushing the toilet etc.

The point is any water that can be reused is. Now you may not be the type of person who goes to the lengths that the Voss family is going to but perhaps you can take some of these tips and add them to your routine.

We don't have to be under another drought to think about water conservation. Water is a precious resource and the more steps we can take to avoid waste can make a big difference for years to come.

Well, it wouldn't be a window blog without mentioning replacement windows. In my last post I mentioned how replacement windows save water. Check out this post to see information on how replacement windows conserve energy and water.

Until next time, Atlanta keep going green and please feel free to share any green tips you have at all whether they are related to windows or not. Thanks!

Jaq B in Atlanta, GA

What Can You Do? Tell Someone!

Yes this blog is entirely about green windows and doors. But I'm hoping that by spending a few minutes reading and looking around you'll be able to see some of the ordinary things you can do to reverse the trend of energy waste and high level of greenhouse gases. Everyone can do his or her part.

You may have found this blog and you want to be "green" but you're not a homeowner. If so you may not be at a place to consider replacing windows and doors with energy efficient units but you still want to help.

Well good news! Today I have a good tip for you in which everyone can take part. You can help the people around you "Go Green" with the investments they put into their homes.

Your mission this week: Talk to someone.

As an individual who is earth conscious and thinking about as many steps as you can take here in Atlanta to make a difference, tell someone you know about the importance of replacement windows and doors.

Why? Because sadly so many homes built here in Atlanta are still lacking where they need insulation the most; windows and doors. They still have single paned windows or poorly insulated doors. These units do not contribute at all to a home's insulation!

In a home with single paned windows heat in the summer time has no way of being kept out of the house. So people crank up their AC units to keep the home cool. Thus, high energy bills and higher C02 emissions! In the winter, it's the same thing. Homes with single paned windows have no way of keeping the heat inside their home and thus the trend continues in the cold months as well.

However, by replacing windows with energy efficient products that are double paned, come with "Low-e", argon gas, and a good warm edge spacer, you can cut those C02 emissions and lower energy bills greatly.

Makes a lot of sense doesn't it? So tell someone! Let them know they can make a very affordable investment in their homes that will make a HUGE difference in protecting our environment. Not to mention all the "green" they'll save in dollars by keeping their heating and cooling bills lower.

Spreading the word is what "Green" is all about.

Was this post helpful? Let us know! Leave a comment or come visit us at atlantawindows.com

Thanks!
Jaq B.

The Lifestyle of Green: The Three Numbers of Window Efficiency

If your aim is to go green you'll soon find that what really makes a long term positive effect on our environment is all the little, daily decisions you make. Going green is a lifestyle. Being able to make a difference that will last a long time to come is a result of living a life that will have beneficial results.

These sundry decisions we make add up. Taking a reusable grocery bag to the store. Maybe biking to the store rather than driving. Using energy efficient light bulbs. All these choices combine to make an important impact.

It's the same with your windows. Since you live with them everyday, making the choice to upgrade to well insulated energy efficient windows is a huge step you can take to keep heating and cooling costs way down and even reduce the amount of harmful C02 emissions that are released.

When you think about what kind of laundry detergent you purchase you usually look for the kind that's low in phosphorous. When you pick out a new window for your home why not select a replacement window that will reduce energy cost as well as give you a good conscience knowing you've cut down on emissions as well.

So here's a quick tip. When selecting an energy efficient window, pick the one that gives you the best numbers for your buck. There are three numbers to consider that will help you know the thermal value of each window you look at.

U-Value-This value measures the overall thermal value (glass, frames, and sashes) of a window by telling you how slowly heat is transferring through window. The lower the better. Most good windows will have a U-Value of around .28-.30. Anything higher than a .30 may not be worth a second look.

R-Value- It's the inverse of U-Value and uses a more is better scale. It usually measures the density of insulation and how well it blocks heat. Higher is better here. Most well insulated windows have an R-Value of 4 in the glass. The tricky thing about R-Values is that you can get different values from different components of the window. For example the glass may have a 4 while the sashes have an 11. That's why we mostly turn to U-values for an accurate assessment of a window's thermal value.

Solar Heat Gain Coefficient-(SHGC) measures how well a window blocks heat from sunlight. The SHGC is the fraction of the heat from the sun that enters through a window. SHGC is expressed as a number between 0 and 1. The lower a window's SHGC, the less solar heat it transmits. A good number to look for on a window is .23-.25.

So as you look into replacement windows, these numbers will give you a good idea of what you're comparing between products. The better the numbers the better the performance you'll get and your dollars can go a lot further. You'll be investing in a window that will not only last a long time but its insulation value will be one that you can feel good about.

For even better numbers in a vinyl replacement window, don't forget about the options of triple paned units, krypton (rather than argon) gas, and Super Spacer (one of the best spacers available).

Why Are your Wood Windows Rotting?

Brought to you by Atlantawindows.com
The pictures attached came from a recent window replacement job we completed this past week. Many Atlanta homeowners deal with rotted wood and give us a call to replace the old rotted windows with non rot vinyl windows or even pvc windows. But why is it that so many homes in Atlanta have rotted wood around the windows and even rotted sashes?

One reason is seen in these pictures here. The builder of the home that these samples were taken from took a major shortcut during the original installation. Every wood window has flashing installed on its top edge to ensure that water will run off the window and away from the wood to prevent rot. Usually the flashing is a sturdy thin layer of metal or pvc that keeps water wicking away from the wood components of a window. For this flashing to be effective it has to have good water tight seal and be installed correctly. However, if you’ll look a little closer you’ll see that the flashing that was taken from this house is not capable of properly protecting the wood beneath it because of the vent slits all through it.

This is a serious problem that brings up an important question. How sure are you of proper window installation around your home? There are a lot of great home builders in Atlanta who take the time to install quality products and make sure everything will last a long time. However, there are a lot of homes that we serve everyday that have experience the same poor craftsmanship that this home was subject to. There are a lot of steps builders can take to make sure wood does not rot but to many builders will not take the time to use proper techniques or in the case of this home proper flashing materials.

We regret that this home owner had to replace their windows because of negligence and sloppiness. We are glad though that the same homeowner now has replacement windows that are guaranteed to have been installed correctly by a company that can stand behind its work for a lifetime. We at Atlanta Area Window and Door use non rot window components such as pvc brickmold, sills, nosing, and blind stop with only the best caulk to ensure protection against water damage.

Great installation with proper materials done right the first time can prevent a mountain of problems.

For more information or questions visit us at Atlantawindows.com

What's the deal with gas?

You may have heard people talking about argon and krypton gas when discussing replacement windows lately. When these mentions of gas and windows come up do you scratch your head and reply "I didn't windows had gas!"?

It's a fairly new feature that replacement windows have nowadays to include some kind of slow moving gas in the space between the two panes in a modern replacement window. And though now it has become common to find on almost any vinyl window these days, questions still arise as to why people are even talking about gas when referring to their windows.

Let's start with argon gas. Almost any double paned replacement window on the market will have this gas as a standard feature. Along with low-e, argon gas is pretty much a non-issue when selecting a vinyl replacement double hung window because every insulated window has it. But what is argon gas, what does it do, and why should you make sure your window have it?

Argon is a very dense, slow moving, inert gas. The reason it is pumped in between the panes of replacement windows is because of its unique ability to slow down heat from entering into your home. It works along with the low-e coating replacement windows have to keep a high insulation value in your home (measured by U-values and R-values). Typically, a replacement window with argon gas and low-e will have a U-value somewhere around .25 to .30 (remember, the lower the better!). Again, argon gas is standard in most replacement windows and if it's not included as part of the insulation package it's not worth looking into.

Now there's also Krypton gas. No, Superman has nothing to do with this one. Much like its cousin argon, Krypton is an odorless, tasteless, invisible gas that is used for its inert, dense qualities. However, Krypton is much denser and has better insulation qualities than argon. Krypton is not typically offered as a standard item in insulated glass packages and with most windows is an upgraded or added option. Many vinyl window manufacturers offer Krypton gas as an option or even a krypton and argon blend for a better insulation value.

Typically, adding Krypton or a Krypton/Argon blend will provide your glass with a .16 to .10 U value (don't forget less is more).

There you have it. A little crash course in krypton and argon gas and why you should be sure it's a part of any replacement window you install in your home.

For more information visit us at Atlantawindows.com

Heat Wave-Are Your Windows Helping or Hurting?

For the next week, we'll see temperatures in the 90's and even up to 100 by this Thursday! That's right, it's August in Atlanta. And as if the many smog alerts, weren't enough to make you want to stay indoors, our recent heat wave may be enough to make Atlantans take up permanent residence in their air conditioned residences.

Believe it our not, energy effcient replacement windows can do a lot to help keep your home cool in the summer time. Why is that? Because all replacement windows today are insulated with a low-e (low emissivity) coating that keeps heat from passing through the glass in your windows.

Clear glass windows, even in a double paned window, have a very low heat resistance and allow heat to pass freely into your home in the summer. Thus, cooling costs go through the roof as your system tries to counter the heat that pours into your home.

That's why replacement windows are such a smart choice when looking for ways to beat the heat of Atlanta's summertime. Installing energy efficient replacement windows can increase your energy efficiency up to 10 times what you may have now!

Atlanta Area Window and Door Co will be glad to see that you get properly installed, energy efficient replacement windows to help keep your home very cool this summer.

Atlanta: Vinyl Double Hung Windows to Wood Casements

Most homeowners in Atlanta these days are looking to replace old single paned, rotted, clear glass windows with vinyl windows. And vinyl is a good choice. It's a cost effective, energy efficient choice and the best part is, vinyl windows don't rot and look great.

However, oftentimes we run into the customer who has and wants to retain a more traditional look. Enter the wood replacement window.

Unlike many other window and door companies in Atlanta, we actually sell and install wood windows almost as often as vinyl windows. Just last week I helped a lady get a pair of wood casement windows installed in her home. She's living in a beautiful old home in Atlanta that she's remodeling for her and her family's move down from North Carolina. We also sell a great number of wood sash replacements for customers who don't necessarily need a full window unit but need low-e , double paned, insulated glass in their home.

So remember there are a variety of solutions to the challenges you face while improving your home. Our sales staff at Atlanta Area Window and Door we does not enter into a home with any agenda other than to make sure each homeowner gets exactly what they want and need installed in their home.

Visit our website for more information or to schedule an appointment today.